BACKGROUND The most common method of fluid applications are inefficient, wasteful, and undermine operator safety and the work environment. Falcon Technologies has developed a unique product which can provide a strategic competitive edge in the marketplace by addressing and resolving specific fluid problems. HOW IT WORKS Fluids such as oil, paint, adhesives, solvents, water base products and other viscous materials are applied with a controlled atomized spray in a closed loop containment system. " Quite simply, Falcon Technologies puts exactly what you want where you want it, with no waste or clean up " WHAT CAN FALCON TECHNOLOGIES DO FOR YOU? Here are a few advantages we can provide you with:

	Custom design to fit existing conditions. Controlled viscosity to allow for a wide range of fluids. No air contamination. Reuse, recycle and recover. Closed loop transfer system. Versatile and compact. Low maintenance. Quality assurance. Parts and service commitment. Cleaner finished products. May eliminate most wash cycles. Protects operators from hazardous materials. Short term investment payback.

	* Three year in-plant testing showed dramatic oil savings, fewer rejected parts, lower press maintenance and improved housekeeping.

 

Technical Information

Pump                                             Fluid Pressure                        300 - 600 PSI

                                                      Air Consumption                    1.5 - 11 CFM

                                                      Ratios Range From                 10:1 through 17:1

Spray Heads                                 Film Thickness                        0 - saturation

                                                      Fluid Output                             17 oz/min - 135 oz/min

                                                                                                       in continuous run

                                                      Spray Angles                            10* through 88*

                                                      Air Consumption                       5 through 8 CFM

Viscosity Control                         Dependent upon fluid dynamics

                                                     Average initial viscosity of 2500 CPS drops

                                                     exponentially to desired spray viscosity

Electronics and                            Adapts to existing voltage

Air Control                                   Interface with existing PC or stand alone

Line Speed                                   Can accommodate full range of line speeds by 

                                                     altering tip size, run time and number of applicators

Evacuation System                       Typical applications                   Minimum 200 CFM

                                                                                                          Maximum 2500 CFM

Material Capacity                        Will accommodate any size throat opening

Dimensions                                  Two head system typically 12" W x 8" D x 20" H

Weight                                          Two head system typically 150 lbs.

Design                                           Available in offset, inline or multiple head design